CNC Fab 94.5-03 7.3L Super Comp 400cc Hybrid Injectors - 42205X

These CNC Fabrication, LLC remanufactured Super Comp (400/300, or 400/400) hybrid injectors are for competition only.

Commonly called a Stage 4 or Stage 5, these "Super Comp" 400cc hybrid injectors mean business and will typically produce 650+hp with proper supporting modifications.  This size of injector is where you will need bottom end engine work done, like billet rods, balancing, and a plate girdle. Not recommended for towing.

**See Suggested Modifications tab for turbo, fuel, and hpop upgrades**

Features:

• These are performance injectors
• 300%, or 400% over nozzles
• Tungsten Coated Plungers and Barrels
• O-rings
• Nozzle and Intensifiers Springs
• Better than OE specifications
• We do NOT use shims, these injectors are machined to set proper armature clearance
• Each set of injectors will come with flow sheet test results
• Tested on the newest Hartridge flow bench using the latest injector technology
• Free Ground Return Shipping

Shipping: Lead times may vary depending on workload

**PLEASE ALLOW 3-5 DAYS AFTER YOUR CORE(S) HAS BEEN RECEIVED FOR OUR ACCOUNTING TEAM TO PROCESS YOUR REFUND. EXPECT DELAYS IF YOU DO NOT FILL OUT THE PAPERWORK PROPERLY**

**See Core Policy >>> Here <<<**

If you are sending in your cores first, please click the "SENDING IN FIRST" link below and print off the form to send it in with your injectors. If you have extra cores, please see the other form for store credit or reimbursement options.

1. CORE RETURN
2. INJECTOR REGISTRATION

Warranty:

Covered by CNC Fabrication's limited lifetime warranty.  Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed.  Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc.  Warranties are non-transferable, and only offered to the original purchaser.