CNC Fab 94.5-03 7.3L CNC Fab Stock Plus 160/0 Injectors - 422036

CORE CHARGE - $560 FEE WILL BE APPLIED AT CHECKOUT

These CNC Fabrication, LLC remanufactured Stock Plus (160/0) injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke.

Commonly called a Stage 1 or AC code High Output injectors, these "Stock Plus" 160/0 injectors will typically produce around 325-375hp with proper supporting modifications depending on the year of your truck.  

**See Suggested Modifications tab for turbo, fuel, and hpop upgrades**

Features:

• Great for towing, or just wanting a mild power increase
• Stock Nozzles
• Tungsten Coated Plungers and Barrels
• O-rings
• Nozzle and Intensifiers Springs
• Better than OE specifications
  
• We do NOT use shims, these injectors are machined to set proper armature clearance
• Each set of injectors will come with flow sheet test results
• Tested on the newest Hartridge flow bench using the latest injector technology
• Free Ground Return Shipping
• Installation Instructions

Shipping: LEAD TIMES VARY DEPENDING ON WORKLOAD

**PLEASE ALLOW 3-5 DAYS AFTER YOUR CORE(S) HAS BEEN RECEIVED FOR OUR ACCOUNTING TEAM TO PROCESS YOUR REFUND. EXPECT DELAYS IF YOU DO NOT FILL OUT THE PAPERWORK PROPERLY**

**See Core Policy >>> Here <<<**

If you are sending in your cores first, please click the "SENDING IN FIRST" link below and print off the form to send it in with your injectors. If you have extra cores, please see the other form for store credit or reimbursement options.

1. CORE RETURN
2. INJECTOR REGISTRATION

Warranty:

Covered by CNC Fabrication's limited lifetime warranty.  Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed.  Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc.  Warranties are non-transferable, and only offered to the original purchaser.

Suggested Modifications

94.5-97 Trucks: These are a great upgrade from the stock 90cc injector with no other supporting mods. We do recommend upgrading your turbo at the very least with a billet wheel. These will run just like stock on OBS trucks with no custom tuning needed, and will work with canned tunes due to them already being a single shot injector, but custom tuning will be better.

Recommended Turbo Options:

• KC Turbos 94.5-03 7.3L S300 Turbine/Billet Wheel Kit - 300377
• 94.5-97 KC Turbo Stock Plus - 300134
• KC Turbo KC300X Stage 1 63/70 94-97 7.3L Turbo 1.0 AR Housing - 300163
• Borg Warner s363sxe

Recommended Fuel Upgrade: None needed

Recommended Hpop Upgrade: 

• Bosch 99.5-03 7.3L High Pressure Oil Pump - HP008X (Cannot be used on 94.5-95 model years)
• CNC Fabrication 94.5-95 7.3L Stage 1 HPOP - 424015
• CNC Fabrication 96-03 7.3L Stage 1 HPOP - 424017

98.5-03 Trucks: These are a mild power upgrade and a bit more efficient than stock 130-140cc split-shot injectors. They will work with little to no other modifications except they will require custom tuning due to these being a single shot injector vs split shot.  No turbo upgrade is necessary, but we do recommend a billet wheel or this turbo.  for the 99.5-03 or this one if you have the early 99 truck.  

Recommended Turbo Options:

• KC Turbos 94.5-03 7.3L S300 Turbine/Billet Wheel Kit - 300377
• KC Turbo 99.5-03 7.3L Stock Plus Turbo - 300132
• KC Turbo KC300X 63/68 Late 99-03 7.3L Turbo - 300235
• KC Turbo EARLY 99 7.3L Stock Plus Turbo - 300133
• KC Turbo KC300X 63/68 Early 99 7.3L Turbo - 300234
• Borg Warner s363sxe

Recommended Fuel Upgrade: 

• None needed, but this kit is a nice upgrade below
• CNC Fabrication 99-03 7.3L 4-Line Feed Fuel Line Kit - 422001

Recommended Hpop Upgrade: 

• Bosch 99.5-03 7.3L High Pressure Oil Pump - HP008X
• CNC Fabrication 96-03 7.3L Stage 1 HPOP - 424017