FlashScan V2 with GM & Dodge Cummins Tuning supports a wide selection of GM Gas, GM Diesel and Dodge Cummins engine and transmission controllers. Use the Supported Vehicles database to check for vehicle support.
FlashScan V2 with GM & Dodge Cummins Tuning ships with four VIN licenses to tune four supported engine controllers (ECM or PCM) and four supported transmission controllers (TCM). The ECM/PCM and TCM do not need to be for the same vehicle. Additional VIN Licenses (up to a limit of 221 per FlashScan V2 device) or Unlimited Stream Licenses (for selected controllers) may be purchased.
Security
- Prevent unauthorized reading, editing and flashing of custom tune files.
- Tune files are encrypted with EFILive proprietary routines.
- Use Locking options to prevent tune files from being read from the ECM/TCM.
Licensing
- Multi-vehicle licensing.
- FlashScan V2 with both Tuning Options ships with 4 VIN licenses to tune four supported vehicles.
- Each VIN license supports one engine and one transmission controller. The engine and transmission do not need to be from the same vehicle.
- Additional VIN licenses (up to 221) can be purchased.
Quick Setup
- Configure and program all device settings, scan and tune settings, tune files and security in a single process.
- Save Quick Setup configurations for easy reuse.
- Email BBX configurations to support remote customers.
BBX
- Read/Flash FlashScan V2⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent).
- Store tune & log files to internal memory, or SD card.
- Read & clear DTC codes.
- High speed data logging.
- Display data while logging.
- Read & program calibration and/or operating system data of engine controller.
Pass-thru
- PC⇄FlashScan V2⇄Connected Vehicle read/flash between 30 sec and 7 minutes (vehicle dependent).
- Store tune & log files onto PC.
- Read and clear DTC codes.
- High speed data logging.
- Gauges & charts display in real time.
- Read & program calibration and/or operating system data of engine controller.
Tools
- Integrate your own tuning parameters.
- Search files using key vehicle data (VIN, OS, segment).
- Customize software settings – Scan & Tune file save templates, displays, units, dashboards.
- Command Line Interface (CLI) and gang-programming automates processes and programs up to five devices simultaneously.
Contents
- EFILive FlashScan interface
- OBDII cable (RJ45 to SAE-J1962)
- PC cable (USB A to B)
- Serial cable (RJ12 to RS232 9-pin female)
- 2 x AD-2 external input connectors
Specification
- Built-in LCD screen
- Built-in audible alarms
- Upgradable bootblock and firmware
- External analog, digital, serial & thermocouple inputs
- 8MB internal memory, 6MB (approx.) available for tune/log files
- SD memory card slot. Supports SDSC V1.0, SDSC V1.01, SDHC V2.0 up to 32GB. SD Cards with a capacity of less than 64MB not supported
- Vehicle Input Voltage - Min 9V, Max 12V
Requirements
- PC or laptop capable of running Win7 or higher
- Optical drive
- USB port
- Color screen with 1024x768 or greater resolution
- 200MB of available disk space
Communications Protocol
- SAE-J1979 CAN protocol
- SAE-J1850 VPW protocol
Integrates with (not included)
- K-type thermocouple
- AutoCal
- SD Card
- WO2 Serial Adapter (Null Modem) Male