Fleece 1998.5-2020 Dodge PowerFlo In-tank Lift Pump Assembly
FPE-34754
There are 5 units left in stock.
- Vendor
- Fleece Performance Engineering
- Regular price
- $1,370.60
- Sale price
- $1,370.60
The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!
Direct OEM In-Tank Replacement:
The PowerFlo Lift Pump retains the factory water-in-fuel sensor, factory fuel heater, factory fuel lines, and installs in less than half the time of other high flow lift pumps.
Dual Gerotor:
Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.
Seamless Integration:
The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.
Aftermarket Capable:
Want the benefits of the in-tank pump but need to run your own fuel lines or aftermarket filters? The pump outlet and return is threaded to accept a -8 O-ring fitting (3/4"-16 thread).
The PowerFLo Lift Pump is also backed by a LIFETIME WARRANTY!
| Year | FPE Part Number | Replaces Dodge/Ram OE Part Number |
| 2005-2009 | FPE-34560 | RL143160AB |
| 2010 | FPE-34561 | 68084965AB |
| 2011-2018 | FPE-34562 | 5145571AA |
What Our Customers Are Saying:
Installation Instructions:
2005-2018 Cummins PowerFlo Lift Pump Installation [tank removal]
2005-2018 Cummins PowerFlo Lift Pump Installation [bed removal]
Warranty:
PowerFlo Lift Pump Warranty Policy
Prop 65
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Additional Information
| Max RWHP | 800 |
|---|
Only from Fleece, a complete fuel supply upgrade kit for your 1998.5-2002 Dodge Cummins. The kit includes everything you need to properly route, plumb, pump, and filter fuel for your VP engine. Includes a new sending unit and float to get your fuel gauge working again!
Kit includes:
- PowerFlo Lift Pump with integral fuel sender
- Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207)
- Filter base with integral mounting
- Distribution filter block / filter coupler
- Push Lock hose and all necessary AN and barb fittings
The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!
Direct OEM In-Tank Fitment:
The PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps.
Dual Gerotor:
Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.
Seamless Integration:
The active fill bucket eliminates the need for tank sumps, draw straws, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.
Limited Lifetime Warranty on the PowerFlo Lift Pump when purchased with this kit: PowerFlo Lift Pump Warranty Policy
*Patent Pending
Only from Fleece, a complete fuel supply upgrade kit for your 2003-2004 Dodge Cummins. The kit includes everything you need to properly route, plumb, pump, and filter fuel for your Cummins engine. Includes a new sending unit and float to get your fuel gauge working again!
Kit includes:
- PowerFlo Lift Pump with integral fuel sender
- Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207)
- Filter base with integral mounting
- Fuel Filter delete (FPE-FFD-RO-3G)
- Distribution filter block / filter coupler
- Push Lock hose and all necessary AN and barb fittings
The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!
Direct OEM In-Tank Fitment:
The PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps.
Dual Gerotor:
Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.
Seamless Integration:
The active fill bucket eliminates the need for tank sumps, draw straws, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.
Limited Lifetime Warranty on the PowerFlo Lift Pump when purchased with this kit: PowerFlo Lift Pump Warranty Policy
*Patent Pending
Check out the full installation of the kit from our friends at Thoroughbred Diesel:
Prop 65WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Additional Information
| Max RWHP | 800 |
|---|
**PowerFlo Lift Pump P/N: FPE-34562 for MY 2011–2021; Replaces Dodge OE Part No. 5145571AA**